Call Us Now : 587-819-1097
Ways To Prevent A Leaking Roof

Ways To Prevent A Leaking Roof

Water entering a house through a leaking roof can result in costly repairs. If you see water entering your house, a roof leak is likely. Roof leaks can be caused by a variety of reasons. The repairs needed for a roof leak will vary depending on the severity and location of the leak and must be looked at by a professional roofing company in Penhold. You should also keep up to date with the latest news in roof repair. The following are ways to prevent a leaking roof:

Minor Leaks

Small leaks in your roof will cause water stains on the ceiling in a room or leave streaks on a wall. Roof leaks must be detected and repaired quickly to avoid further damage to your home. If water leaking into the house, there is a possibility of mold and possible rotting of the wood.

Vent Boots

The boot that surrounds a vent that comes out of your roof is a gasket that is supposed to prevent leaks by sealing the roof and the vent pipe. One of the reasons a leak occurs at a vent is that of a loose nail or a cracked gasket. You can easily drive nails with a hammer or the vent boot may need to be replaced. If this is not an option, the roofing cement can be used to seal any leaks.

Roof Vents

Old vents on your roof can develop cracks over time. Examine the housing of each roof vent to see if a crack or other defect is present. You will need to remove the nails used to attach the vent and then take it out. If you do this with care, shingles may not need to be removed. Insert the new vent and drive the nails with a hammer to secure it to the roof. Another option is to use screws. Cover the head with screws or nails with roofing cement.

Small holes

Leakage in your home can come from small holes in the shingles. Small holes may result from nails or screws used to attach an antenna or satellite dish. Small holes allow water to enter the house during any rainstorm. A simple way to repair small holes in shingles is to use roofing cement. You will need to use a putty knife or a plastic scraper to fill all the holes, this ensures roof repair is completed successfully.

Step Flashing

Flashing that is used where two different sections of the roof meet can channel water if is it not secured. A piece of flashing can be fixed with putty or using roofing cement. If you notice that a piece of flashing is rusty, then you will need to replace it. Shingles must be removed before the flashing can be pried out.

Damaged shingles

A damaged shingle on your roof can allow water to enter your home. Damaged shingles can be repaired by covering the damaged area with roofing cement. Another option is to remove the shingle and replace it with a new one.

Be sure to contact a local recommended roofing company to make sure that your roof is in tip-top shape and to fix anything or install new shingles if need be.

Close Menu